Opis
Dostupnost: Po narudžbi
Specifikacije:
A single-door mechanism that provides complete entry and exit control via connected Access Readers.
Features
– (2) Lock terminals (12V and Dry)
– (2) AUX terminals for an external siren and automatic door opener
– (4) Additional inputs (sensors and buttons)
– Connect and power using PoE++
– Connect to two UniFi Access readers and one UniFi Protect camera or UniFi Protect Chime
Specifications
Mechanical
– Dimensions: 190 x 126 x 30.5 mm (7.5 x 5 x 1.2")
– Weight: 457 g (1 lb)
– Enclosure material: Plastic enclosure with metal mount plate
– Mounting options: DIN rail
Hardware
– Networking interface: (4) 1 GbE
– PoE interface: (3) PoE (Pins 1, 2+; 3, 6-)
– Power method:
• PoE++
• UL 294 Power-limited Class 2 PSU
• UL 60950-1/62368-1 LPS/PS2 PSU
– Supported voltage range: 48V DC
– Max. power consumption: 51W
– Total available PoE: 60W
– Max. PoE wattage per port: 15.4
– Voltage range PoE mode: 44–57V DC
– Input terminals
• REX: request to exit
• REN: request to enter
• REL: remote release
• DPS: door position sensor
– Dry output relay
• Lock: rated 30V DC, up to 1A
• Aux: rated 30V DC, up to 1A
– Powered output relay
• Lock: 12V DC, up to 1A
• Aux: 12V DC, up to 0.33A
• Line: 12V DC, up to 0.33A
– Button: (1) Factory reset
Recommend max. cable length
18 AWG UACC-Cable-DoorLock 20 AWG length 22 AWG length 24 AWG length
Relay length
UA-Lock-Electric (400mA) 100 m (217 ft) 42 m (328 ft) 66 m 138 ft) 25 m (82 ft)
UA-Lock-Magnetic-270kg (800mA) 46 m (151 ft) 30 m (98 ft) 20 m (66 ft) 12 m (29 ft)
UA-Lock-Magnetic-540kg (500mA) 80 m (262 ft) 51 m (167 ft) 32 m (105 ft) 20 m (66 ft)
Other locks (1A) 36 m (118 ft) 24 m (79 ft) 15 m (49 ft) 9 m (30 ft)
– Operating environment: Indoor use only
– Ambient operating temperature: 0 to 40° C (32 to 104° F)
– Ambient operating humidity: 5 to 90% noncondensing
– Software information: The software version of a product can be checked at https://unifi.ui.com
– UL 294 level:
• Destructive attack: Level I
• Line security: Level I
• Endurance: Level I
• Standby power: Level I
– UL 294 statement
• Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
• The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
– PoE cabling requirements:
• Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
• The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
– CAN/ULC-60839-11-1 Grade: Grade assignment: I
– Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
– Document number, and issue date and/or revision level: UA-Hub, Ver 02
LEDs
– PoE in:
• Steady white: Pending adoption
• Steady blue: Adopted
• Alternating white/blue: Firmware updating
– PoE out : Blinking white: Active signal
– Input terminals: Blinking white: Active signal
– Output relays: Blinking white: Relay triggered
Software
– Management application: UniFi Access: Version 1.22.17 and later
Jamstvo: 12 mjeseci
Kod dobavljača: UA-Hub-Door
